več se dva dana jjje..... i neče
evo ti iz user manuala šta piše
* Insert the brown master key and turn on for two seconds
* Insert the service key and turn on for two seconds
* (extra service keys are included here)- Insert the extra service key and turn on for two seconds
* Insert the brown master key and turn on for two seconds
* The timing of the two seconds can be critical so use a watch to time it,you may need to do the sequence several times before it is accepted.
* Changing from one key to the next should be done within ten seconds.
* An extra service key is not just added,you must go through re-programming all the keys as above.You are not re-programming the master key, the master key is giving permission for theservice keys to be added.
* You do not need to start the engine just to check if the programming has been successful,Just turn on the ignition and watch the LED.One short flash (half second) means the programming was successful.One long flash (two seconds) means the system is still not programmed
sve je isto za leader,quasar i master masine , tako da vjerovatno su presudne ove 2 sekunde .. ja kad sam kodira iz 2. puta sam uspia i gleda sam na štopericu
